top of page

Load data for .223 Ackley Improved + .224 | 40gr | RWS TMH

Recommended Powder(s): ADI AR 2207, Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200

.223 Ackley Improved + .224 | 40gr | RWS TMH

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 40gr | RWS TMH
Bullet Weight:
40gr | 2.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.460" | 11.7mm
Caliber:
.223 Ackley Improved load data
Case Length (l3):
1.760" | 44.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
-0.006" | -0.2mm
Shank Seated Depth:
-0.006" | -0.2mm
Case Capacity:
32.4 Grains of Water | 2.10 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
55114 psi | 3800 bar
LID:
LID_B5352_C136
Last updated:
2025-02-02

Load data for 70 loads in caliber .223 Ackley Improved with .224 | 40gr | RWS TMH bullet and 35 powders such as ADI AR 2207, Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
91%
49588
90%
**32
100%
ADI AR 2219
<<locked>>
93%
48327
88%
**19
96%
Accurate 2015
<<locked>>
96%
43976
80%
**88
97%
[Accurate 2460]*
<<locked>>
96%
48660
88%
**56
93%
Accurate 2495
<<locked>>
97%
36637
66%
**99
95%
Alliant AR-Comp
<<locked>>
96%
38841
70%
**65
98%
Alliant Reloder-10x 👍
<<locked>>
96%
48805
89%
**25
99%
Alliant Reloder-7 👍
<<locked>>
90%
49443
90%
**83
99%
Baschieri & Pellagri 106
<<locked>>
92%
48820
89%
**78
97%
[Hodgdon Benchmark]*
<<locked>>
97%
46760
85%
**74
92%
[Hodgdon CFE BLK]*
<<locked>>
89%
49429
90%
**78
92%
Hodgdon H322
<<locked>>
97%
45382
82%
**50
95%
Hodgdon H335
<<locked>>
93%
48414
88%
**93
95%
Hodgdon H4198
<<locked>>
91%
49501
90%
**33
96%
Hodgdon TrailBoss
<<locked>>
96%
29370
53%
**29
100%
IMR 4198 👍
<<locked>>
95%
48559
88%
**93
99%
IMR 4227
<<locked>>
85%
48544
88%
**40
100%
[Lovex D073.4]*
<<locked>>
95%
49559
90%
**53
93%
[Lovex D073.5]*
<<locked>>
97%
48660
88%
**56
93%
Lovex S053
<<locked>>
86%
48907
89%
**20
100%
Norma 200 👍
<<locked>>
92%
48370
88%
**99
99%
[Norma 202]*
<<locked>>
97%
39044
71%
**83
92%
ReloadSwiss RS 14
<<locked>>
96%
28993
53%
**75
100%
ReloadSwiss RS 36
<<locked>>
84%
47935
87%
**60
100%
[ReloadSwiss RS 40]*
<<locked>>
96%
48733
88%
**79
94%
[Rottweil R 901]*
<<locked>>
96%
41872
76%
**28
93%
SNPE Vectan BA6 1/2
<<locked>>
89%
48327
88%
**43
100%
SNPE Vectan SP 10
<<locked>>
93%
49023
89%
**12
95%
[SNPE Vectan Tubal 3000]*
<<locked>>
97%
42061
76%
**60
93%
[Somchem S321]*
<<locked>>
96%
46470
84%
**37
92%
[Somchem S335]*
<<locked>>
97%
41394
75%
**63
94%
Vihtavuori N120
<<locked>>
93%
49313
89%
**66
100%
Vihtavuori N130
<<locked>>
97%
46354
84%
**94
98%
Vihtavuori N133
<<locked>>
97%
38218
69%
**17
95%
[Winchester 748]*
<<locked>>
96%
45411
82%
**37
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
35897
65%
**30
99%
[ADI AR 2219]*
<<locked>>
82%
33127
60%
**22
90%
[Accurate 2015]*
<<locked>>
81%
26658
48%
**12
90%
[Accurate 2460]*
<<locked>>
92%
40828
74%
**79
91%
[Accurate 2495]*
<<locked>>
90%
27992
51%
**43
91%
[Alliant AR-Comp]*
<<locked>>
82%
24714
45%
**69
90%
[Alliant Reloder-10x]*
<<locked>>
81%
29776
54%
**40
93%
Alliant Reloder-7
<<locked>>
81%
37594
68%
**20
97%
[Baschieri & Pellagri 106]*
<<locked>>
81%
33199
60%
**10
92%
[Hodgdon Benchmark]*
<<locked>>
93%
41031
74%
**43
90%
[Hodgdon CFE BLK]*
<<locked>>
86%
44469
81%
**76
90%
[Hodgdon H322]*
<<locked>>
87%
33127
60%
**22
90%
[Hodgdon H335]*
<<locked>>
85%
35737
65%
**87
90%
[Hodgdon H4198]*
<<locked>>
81%
36390
66%
**28
92%
Hodgdon TrailBoss
<<locked>>
81%
23105
42%
**49
100%
IMR 4198
<<locked>>
81%
32169
58%
**76
95%
IMR 4227
<<locked>>
81%
43584
79%
**42
99%
[Lovex D073.4]*
<<locked>>
90%
39929
72%
**56
90%
[Lovex D073.5]*
<<locked>>
92%
40828
74%
**79
91%
Lovex S053
<<locked>>
81%
42554
77%
**02
100%
Norma 200
<<locked>>
81%
33997
62%
**58
96%
[Norma 202]*
<<locked>>
94%
35201
64%
**84
90%
ReloadSwiss RS 14
<<locked>>
81%
22771
41%
**92
100%
ReloadSwiss RS 36
<<locked>>
81%
43294
79%
**51
99%
[ReloadSwiss RS 40]*
<<locked>>
90%
39465
72%
**69
91%
[Rottweil R 901]*
<<locked>>
91%
35331
64%
**61
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
39291
71%
**79
100%
[SNPE Vectan SP 10]*
<<locked>>
84%
35882
65%
**01
90%
[SNPE Vectan Tubal 3000]*
<<locked>>
91%
35317
64%
**89
90%
[Somchem S321]*
<<locked>>
93%
42192
77%
**42
90%
[Somchem S335]*
<<locked>>
90%
32561
59%
**40
90%
Vihtavuori N120
<<locked>>
81%
33214
60%
**15
99%
[Vihtavuori N130]*
<<locked>>
81%
28558
52%
**31
92%
[Vihtavuori N133]*
<<locked>>
87%
28123
51%
**05
90%
[Winchester 748]*
<<locked>>
93%
40988
74%
**32
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page